A transparent, high gloss, non-yellowing acrylic polymer engineer as a cure and seal specifically for exterior surfaces such
as exposed aggregate, natural stone, brick, quarry tile, terrazzo, and other concrete surfaces. It is also suitable for interior
applications. Surface Shine enhances the appearance of all treated surfaces with a high gloss sheen. It's also available in
water-based.
- The concrete surface must be clean and free of standing
water. Remove any sealer or other material that may
inhibit adhesion of the sealer.
- Always apply decorative sealers at the specified rate
(typically 200-300 sq. ft. per gallon). Product may be
sprayed with a hand help "pump-up" sprayer or an airless
industrial sprayer. If roller applied, use a short napped
solvent resistant sleeve.
- Two applications are recommended when an extra high
gloss is desired or on especially porous surfaces. Allow
the first application to cure before the second application.
Dry time will be influenced by both temperature and
humidity. Apply second application at a right angle to the
first application to provide uniform, consistent coverage.
Interested in this item or want more information?
Hours:
Phone: 401-434-4300
Email: support@csi-ri.com
Can't find what you want? Give us a call and we can help you find it.
Additional Information
Manufacturer: Spec Chem