MasterSeal AWB 665

MasterSeal AWB 665 description 

MasterSeal AWB 665 is a one component fluid-applied vapor permeable air/ water-resistive barrier based on Silica Fortified Rubber chemistry. This resilient water-resistant coating may be roller-, brush-, spray-applied or jet rolled directly to approved wall substrates. It provides excellent secondary moisture protection to most wall claddings. MasterSeal AWB 665 complies with the air barrier impermeability requirements of the Massachusetts Energy Code.  Limitation: MasterSeal AWB 665 should not be used for below grade applications or on surfaces subject to water immersion.

Recommended uses:

As an air/water-resistive barrier over the following exterior wall substrates:

• PermaBase^® brand cement board or other ASTM C1325 Type A Exterior approved cement boards; ASTM C1177 type sheathings, including DensGlass^® exterior sheathing, eXP^® sheathing, GlasRoc^® sheathing, Securock^® glass-mat sheathing, Weather Defense^® Platinum sheathing, GreenGlass^® sheathing
• Gypsum sheathing (ASTM C79/C1396); new and untreated Exposure 1 or exterior plywood sheathing (Grade C-D or better)
• Untreated exposure 1 OSB
• Poured concrete/unit masonry; poured concrete/unit masonry treated with MasterSeal AWB 600 FL.
  

MasterSeal AWB 665 provides excellent secondary moisture protection behind many wall claddings including brick, siding, metal panels, EIFS and stucco. (A slip-sheet is required for stucco claddings.)

What are the unique features and benefits of MasterSeal AWB 665?

• MasterSeal AWB 665 qualifies as both an air/water-resistive barrier and flexible flashing material because it meets ASTM E2357, ICC-ES AC212 and ICC-ES AC148 requirements
• As a liquid-applied, continuous membrane it eliminates seams, lap joints and staples; transmits wind load directly to the substrate
• Silica Fortified Rubber technology offers strength, durability and self-sealing properties and require you to apply less material to achieve effective functioning
• Can be applied at temperature at low as -4 °C (25 °F) when MasterSeal AWB 960 AC is added
• Applicator friendly, quick applying and fast drying; it can be spray-, roller-, or brush-applied at low wet-film thickness
• Its textured surface allows sealants, adhesives and spray polyurethane foam to firmly bond to MasterSeal AWB 665