Mixing Nut

1MN

Kelken Construction Systems

Call For Price

Quick Overview

    Keligrout Mix Nut

    Horizontal, vertical or angled up/overhead with cap. Easy-to-use large capacity cartridges. Cartridges are much larger than most competitor's, decreasing labor cost of frequent changes. Easier to pump than most viscous epoxy cartridges. Easier to pump than more viscous epoxy cartridges. Can be used at sub-freezing temperatures or in rainy weather. May be used underwater.

Interested in this item or want more information?

Hours:

Phone: 401-434-4300

Email: support@csi-ri.com

Can't find what you want? Give us a call and we can help you find it.

Details


Equipment
  • Hand Operated
  • Air Operated
  • Bulk Pump

Keligrout 101 Hand Gun Accessories

Other products for Keligrout 101-P applications:

ProductPart NumberPackaging
Mixing Nut1MN25 pcs.

Keligrout 101-P Applications

Keligrout is designed to be used with Rebar and Threaded Anchors. Applications which include:

Bridge & Highway
  • Barriers
  • Bridge Bearings
  • Railings
  • Guard Rails
  • Expansion Joints
  • Fences
  • Anchorages
Marine
  • Fender Systems
  • Crane Rails
  • Bollards
  • Ladders
  • Eyes
  • Curbs
  • Railings
Industrial
  • Tanks
  • Column Bases
  • Machine Bases
  • Rack Systems
  • Equipment Anchors
  • Crane Railings
  • Railings
Sewerage Treatment
  • Tank Bases
  • Weir Gates
  • Crane Rails
  • Hand Rails
  • Pump Mounts
  • Piping Supports

Keligrout 101-P Instructions

Drilling Holes:

Surface preparation is important in all chemical anchoring applications. Kelken Construction Systems recommends that all holes for anchors/rebar be made with air tools. Pneumatic drilling cleans as well as provides a rough texture inside the hole for easy bonding. If electric drilled, holes must be wired brushed in addition to air blowouts so that concrete dust and debris be cleared to allow for good bonding. When holes are DIAMOND CORED, the sides of the holes must be scored which allows the resin to develop a keying action to the concrete surface.

Instructions Keligrout 101-P
  1. Fit twin cartridges into 101 Hand Gun
  2. Remove two black half-moon stoppers.
  3. Fix mixing nozzle tube with retainer nut.
  4. Discard initial 1-2 inches of flow from nozzle.
  5. Inject directly into prepared clean hole.  Keligrout 101-P can be used underwater with no adverse effects when properly installed. Caution should be taken to insure that the hole, after air drilling, has no debris and all anchors should be torqued to assure proper adhesion.
  6. Push anchor/dowel to the bottom of the hole rotating to assure full wetting.
  7. Do not disturb the anchor for one (1) hour, 24 hours full cure.
  8. It is recommended that after 2-3 hours, review residue assuring that material had been properly mixed.
Important Keligrout 101-P Information
  1. Shelf life of KELIGROUT 101-P is 6 months from date (lot number) which is stamped on every tube. KELIGROUT 101-P should be stored at 70°F out of direct sunlight. Storage temperatures should never exceed 85°F.
  2. Do not use Keligrout 101-P in drilled or formed holes that are over 1/4" larger then the anchor/rebar diameter without contacting Kelken.
  3. Always test Keligrout 101-P for job suitability.
  4. Technical sheets included in every case.
Anchor DiameterHole DiameterMinimum Number of Inches Per 32 oz.
1/49/32375
3/87/16310
1/25/8220
5/83/4200
3/47/8180
7/81175
11 1/8160
1 1/81 1/4120
1 1/41 3/890
1 1/21 3/460

Additional Information


Manufacturer: Kelken Construction Systems
For More Information on the Mixing Nut, [Click Here] to Link to Manufacturer Web Site

 
2023 CSI-RI