Cure & Seal WB

CSWB

Spec Chem

Call For Price

CURE & SEAL WB is a water-based, non-yellowing, VOC compliant acrylic polymer engineered to cure, seal, harden, and dustproof freshly placed concrete and improve the wearability and durability of aged concrete surfaces. May contribute to LEED credits.

Quick Overview

  • Provides a tough glossy film that is resistant to abrasion and common staining materials
  • Prevents the adhesion of cementitious droppings and the penetration of most oils and greases
  • Reduces maintenance and clean-up costs
  • Cleans and brightens floors
  • May be recoated prior to occupancy for a glossy final finish
  • May be recoated at any time without stripping the prior application
Interested in this item or want more information?

Hours:

Phone: 401-434-4300

Email: support@csi-ri.com

Can't find what you want? Give us a call and we can help you find it.

Details


Coverage: Ready to use. Do not dilute. Apply with a sprayer, brush, roller or lambs wool applicator. Spraying or a lambs wool applicator generally will provide superior results. Avoid puddles. Apply in accordance with recommended coverage rates.

Curing: 200 sq ft / gal Dustproofing and Sealing: 200 – 400 sq ft / gal Aged concrete: 200 – 400 sq ft / gal For dustproofing and sealing benefits, apply two coats at 300 sq ft / gal. On broom or rough finished concrete, double the coverage rate. Coverage may vary due to porosity and conditions of the concrete. Application temperature above 40o & rising is recommended.

New Concrete: CURE & SEAL WB should be applied as soon as the surface water has disappeared and the concrete surface will not be marred by the walking applicator. At this point, apply in a uniform coat. For a superior finish and added curing and sealing protection, apply a second coat at 400 sq ft / gal.

Existing Concrete: Concrete surface must be clean, dry or damp and free of all stains, oil, grease, dirt, and incompatible coatings prior to application.

CURE & SEAL WB can be used on colored concrete and will renovate existing concrete, brick or terrazzo floors. These surfaces will be brighter and easier to clean and maintain.

CURE & SEAL WB is compatible with most carpets, tile and floor covering adhesives. Due to the wide variation in the chemistry of adhesives, a test section is always recommended.

Additional Information


Manufacturer: Spec Chem
For More Information on the Cure & Seal WB, [Click Here] to Link to Manufacturer Web Site

 
2023 CSI-RI