RoofJoint

RF-JOINT

EMSEAL Joint Systems, Ltd.

Call For Price

EMSEAL RoofJoint, roof expansion joint, is a dual-seal, double-flanged, extruded thermoplastic rubber system for sealing expansion joints in roofs.

Quick Overview


  • High Movement
  • Redundant Sealing
  • Double-Level Roof-Membrane Integration Flanges
  • Redundant Fastening—Adhesion Or Welding & Termination Bar
  • Heat Welded Transitions At Tees, Crosses, Roof-To-Wall, Etc.
  • Watertigh
Interested in this item or want more information?

Hours:

Phone: 401-434-4300

Email: support@csi-ri.com

Can't find what you want? Give us a call and we can help you find it.

Details


Features
    • High Movement
    • Redundant Sealing
    • Double-Level Roof-Membrane Integration Flanges
    • Redundant Fastening—Adhesion Or Welding & Termination Bar
    • Heat Welded Transitions At Tees, Crosses, Roof-To-Wall, Etc.
    • Watertight Transition To Seismic Colorseal Wall Joints
    • Uniquely Addresses Wall Joint To Roof Joint Interface
    • Tpv Or Pvc For Broadest Compatibility With Pvc Or Tpo Sheet Membranes, As Well As Asphaltic And Thermoset Rubber Roof Membranes

Colors
Black or Reflective White

Sizes and Movement Capability

ModelJoint-Gap In FieldMovement Capability
RJ-02001-2 inches (25-50mm)2 1/2-inches (60mm)
RJ-04002-4 inches (50-100mm)5-inches (125mm)
Note: Movement as a percent of joint size is affected by the joint-size into which the RoofJoint installed. In general it is safe to assume that the RoofJoint is capable of 100% movement of mean-temperature joint size. Consult EMSEAL for specific conditions.

Product Description
EMSEAL RoofJoint, roof expansion joint, is a dual-seal, double-flanged, extruded thermoplastic rubber system for sealing expansion joints in roofs. Watertightness is achieved through positive integration with the roofing membrane and a purpose-designed system for transitioning between the joint in the roof and joints in walls.

What's Different?
The waterproofing elements of roof expansion joints currently are looped membranes. The loops either hang down into the joint in the case of metal-cover systems, or are humped up by means of a foam backing. Either way, while they look good in cross-section, looped membranes don’t work well at the transition from the roof joint to wall joints.

EMSEAL’s decades of experience lies in sealing parking and plaza deck joints with systems that sit in the joint.

As with the products used for these other critical waterproofing applications, an extruded joint profile that incorporates redundant levels of sealing, low-strain compression and extension capability, and a broad cross-section that can be welded to ensure continuity of seal in changes in plane and direction, are the hallmarks of EMSEAL’s RoofJoint system.

Unique to EMSEAL’s RoofJoint is the double-level flange. This flange configuration facilitates multi-layered, watertight integration with the roofing membrane.

The lower flange is welded or adhered to the roof membrane brought up to the joint. A termination bar and anchors mechanically locks the flange to the roof decking or blocking.

The upper flange counterflashes the termination bar and underlying membrane ensuring that penetrations made by the attachment of the termination bar are completely sealed. The upper flange is further flashed to the roofing membrane by means of the roofing manufacturers’ standard flashing tape or by over-welding a strip of roofing.

Movement at the joint is accommodated by the folding design of the gland.

The double-cell configuration ensures redundancy in sealing.

The geometric shape is purpose-designed for the lowest strain during movement to ensure longevity.

RoofJoint Composition - PVC or TPV
RoofJoint is available in two formulations:
a PVC-Thermoplastic alloy or TPV (Thermoplastic Vulcanizate).

PVC-Thermoplastic Alloy
Manufactured for direct welding to PVC-based roof membranes; for adhesion into hot or cold-applied asphaltic systems; and for adhesion to thermoset-rubber roof membranes (EPDM, Neoprene, etc.).

The PVC version of RoofJoint is extruded from a thermoplastic PVC alloy. Unlike typical PVC’s this blend is recyclable. While other PVC’s can be down-cycled (made into something lesser than the original part) the RoofJoint, during die balancing for example, can be ground up and put directly back into the extrusion stream. This assures virtually no waste in its processing.

Its composition is based on ultra-high molecular weight PVC resins. This family extends the performance of flexible PVC by providing improved toughness, abrasion resistance, compression set resistance and low-temperature properties.A PVC thermoplastic blend was chosen for this product for its compatibility with most known roofing systems.

It can be heat-welded to PVC roofs, and subject to the recommended procedures of the particular roofing membrane manufacture in respect to preparation, cleaning, priming, etc., adheres well to the accessories of all adhered (sheet-goods), and asphaltic (hot or cold applied) systems.

TPV (Thermoplastic Vulcanizate)
Manufactured for welding to TPO (Thermoplastic Olefin)-based roof membranes, the TPV version of RoofJoint, is offered for its ability to be welded to TPO membranes.

Performance
Movement capability:
At least 100% (+50%; -50%) of nominal joint size at mean temperature for joints from 2 to 4 inches (50 - 100mm) wide.
(NOTE: Movement is affected by the joint size into which it is designed.)

Continuity of Seal
As with all EMSEAL expansion joint systems, continuity of seal is extended to crosses, tees, upturns, downturns, roof-to-wall, and other compound conditions typically found in construction projects.

Factory-fabricated transition pieces can be welded to straight lengths in our plant wherever field measurements are provided or can be butt-welded to straight lengths in the field using simple equipment and training available from EMSEAL. All welds are strengthened with reinforcing strips.

Solid-Wall RoofJoint Closure
This factory-fabricated transition piece is manufactured from SEISMIC COLORSEAL wall-expansion joint material from EMSEAL. This single unit piece has factory-coated silicone bellows on the top and upper-back faces for integration with SEISMIC COLORSEAL in the wall and HORIZONTAL COLORSEAL as a secondary seal and insulator across the roof.

The silicone-coated top side of the closure is shaped to match the underside of the RoofJoint extrusion. The Solid-Wall RoofJoint Closure is installed before installing the RoofJoint. It is installed ¾” down from the roof deck or wood blocking surface. A sealant band of silicone is applied across the upper mating surface of the closure. The RoofJoint is then installed. The underside of the RoofJoint will mate with the top of the already installed closure.

Cavity-Wall RoofJoint Closure
Like the solid-wall closure, the cavity-wall RoofJoint closure, is a factory-fabricated transition piece made from SEISMIC COLORSEAL.

The difference is an extended, horizontal setback portion of coated foam to bridge the cavity from facade to structural backup wall. The sides of the “bridge” are additionally coated with silicone to seal them against moisture in the cavity and to constrain the lateral expansion of the foam into the cavity.

Green/Garden/Vegetative Roofs
RoofJoint is ideally suited for use in sealing the structural slabs beneath green, vegetative roof assemblies. Because the growing medium is loose, compressible and granular, movement that occurs at the structural slab can be absorbed without detrimental effect in the green roof overburden.

Limitations--Not for Hardscape Plazas
RoofJoint is for use in roof decks only. It is not intended for use in split-slab, podium, or plaza deck design.
This is because there is no inherent capability within RoofJoint to separate--topping slab, pavers or other rigid wear course materials from one another at the deck surface to properly accommodate movement in the wear course.

For split-slab, podium and plaza deck design see the FP (For Plaza) series of expansion joints from EMSEAL: Migutan FP-Series, DSM-FP Series, SJS-FP series or SJS-FP-FR Fire Rated Series. If designed for installation into the structural slab of a split-slab or plaza deck design, EMSEAL takes no responsibility for buckling pavers or cracking or binding in topping slabs that will occur as movement from the structural slab is referred through the wear course.

Insulation
Insulation in the joint opening beneath a roof expansion joint is critical in maintaining energy efficiency in the structure. Insulation under EMSEAL’s RoofJoint can be achieved in two ways:

Insulation Method 1
(Specify and Install HORIZONTAL COLORSEAL Beneath the RoofJoint)

The advantage of this solution is that in addition to insulating, the HORIZONTAL COLORSEAL provides an additional watertight barrier beneath RoofJoint that ties into the SEISMIC COLORSEAL RoofJoint transition piece and further ensures continuity of seal and insulation with the wall joint.

The R-Value of HORIZONTAL COLORSEAL is 2.15 per inch of depth. Therefore in 4-inch joint, HORIZONTAL COLORSEAL has a depth of 4.5 inches and an R-Value of 9.675. To increase the R-Value of any size of HORIZONTAL COLORSEAL, specify an increased custom depth.

Insulation Method 2
(Batt Insulation and Looped Membrane by Others)

By installing a looped membrane of standard roofing material (by others) to support fiberglass or mineral wool insulation batts before installing EMSEAL’s RoofJoint.

While commonly done, this solution provides no continuity of R-value with the wall expansion joint and is additionally subject to insulation value loss through moisture retention due to condensation accumulation in the batt insulation.

Additional Information


Manufacturer: EMSEAL Joint Systems, Ltd.
For More Information on the RoofJoint, [Click Here] to Link to Manufacturer Web Site

 
2023 CSI-RI