Fuel & Oil Resistant Sealant

CS-440

Call For Price

For above and below ground fuel containment structures. Not intended for use in expansion joints or joints that move.

Hours: Mon - Fri 7am - 4:30pm

Phone: 401-434-4300

Email: support@csi-ri.com

Can't find what you want? Give us a call and we can help you find it.

SEALING PROPERTIES
Provides permanently watertight joints.
Excellent adhesion and structural integrity.
Bonds well to most surfaces, including: Concrete, Fiberglass, Metal, Plastic and Aluminum.
Sealed joints will not shrink, harden or oxidize upon aging.
Controlled flow resistance for application ease.
Low to high temperature workability: 20°F to 120°F (-7°C to 49°C)
Rugged service temperature: -30°F to +200°F (-34°C to +93°C)
No priming normally necessary. When confronted with difficult installation conditions, such as wet concrete or temperatures below 40°F (4°C), priming the concrete will improve the bonding action. Consult Concrete Sealants for the proper primer to meet your application.
Physical Properties
COLOR: Gray
SPECIFIC GRAVITY, 77°F: ASTM D271 1.30 – 1.50
DUCTILITY 77°F: ASTM D113 6 cm
SOFTENING POINT, RING AND BALL °F: ASTM D36 350°F (177°C)
PENETRATION, CONE 77°F (25°C): ASTM D217 60 – 70 mm
150 gm, 5 sec
FLASH POINT, C.O.C., °F: ASTM D92 300°F (148°C) min.
% SOLIDS: 99%

Manufacturer: ConSeal

For More Information on the Fuel & Oil Resistant Sealant, [Click Here] to Link to Manufacturer Web Site

2023 CSI-RI